Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE MEDIA STAND
Made in Denmark 2004
Page 6 of 6
18 Fully extend drawer glides. Slide assembled drawers
onto drawer glides, fitting drawer slides into grooves on
drawer side panels.
20 Conceal all exposed cams by inserting cam covers.
Assembly is now complete.
19 Secure drawers to drawer glides by inserting short
machine screws through the drawer side panel into the
corresponding threaded first hole on the drawer glide.
CLEANING AND CARE
Clean wood surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
17 A. Insert 2 cam screws into the back side of the drawer
front.
B. Fit drawer front onto the drawer assembly and secure the
2 cams with a screwdriver.
C. Insert 2 long machine screws through the drawer front
and the 2 metal pull standoffs, then into the threaded holes
of the metal pull. Tighten with a screwdriver.
x 2
B
A
C