Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE MEDIA STAND
Made in Denmark 2004
Page 5 of 6
14 Align the 10 holes in the base frame with the pilot holes
in the bottom panel and attach with 10 long wood screws.
15 A. Attach drawer side panels to drawer back panel
using 2 medium wood screws.
B. Insert 1 small cam into the front of each side panel,
making sure the arrow on the cam faces towards the holes
on the edge of the side panel.
A
B
x 2
16 Slide drawer bottom panel into the grooves at the
base of the drawer assembly.
x 2
13 Fit each metal leg into the corner brackets of the
metal base frame, aligning the holes in legs with holes in
the brackets. Insert 1 long machine screw through the
corner bracket into each leg and secure with a screwdriver.
DRAWER CONSTRUCTION