Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE MEDIA STAND
Made in Denmark 2004
Page 4 of 6
12 Place bottom panel into positon. Make sure the 10 pilot
holes on the underside of the panel face out. Insert 9 large
cams into the holes at the base of the side and middle
panels. Insert 9 cam screws and 9 dowels and secure all
cams with a screwdriver.
Bottom
Panel
(10 holes
on under-
side
face out)
10 Insert 9 large cams into the holes at the tops of the
side and middle panels, making sure that arrows point
towards the top edge of the panels.
11 Place top panel into positon, repeating the assembly
method used for the side panels. Insert 9 cam screws and
9 dowels into the underside of the top panel. Secure all
the cams with a screwdriver.
Top Panel
(underside)
9 Attach right side panel using assembly method in
Steps 3 - 5. Insert 2 dowels and 2 cam screws into the
right side panel. Secure cams with a screwdriver.
Right Side Panel
(outside)