Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE MEDIA STAND
Made in Denmark 2004
Page 3 of 6
8 A. Insert 4 dowels into pre-drilled holes at the edges
of the back panel. Align with holes in the left side panel and
fit back panel into position.
B. Insert 4 large cams into underside of right shelf panel.
A
B
Back
Panel
7 A. Insert 2 wood dowels into the inner holes of left
shelf edge.
B. Fit middle panel into position and secure cams with
screwdriver.
B
A
Middle panel
6 A. Repeat Steps 1 & 2 to attach 2 drawer glides to the
middle panel (1 on each side), with short wood screws.
B. Fasten 2 cam screws to the outer holes of middle panel.
A
B
5 Using a screwdriver, turn 2 cams 90 degrees clockwise
to secure shelf panel to left side panel.
x 2
Make sure
arrow on
drawer glide
points forward
Middle panel