Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE LARGE MEDIA STAND
Page 5 of 5
Made in Denmark - r09
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the wood is finished with a protective clear lacquer.
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
A
B
A
B
C
C
1
2
3
HINGE ADJUSTMENT
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
14 A. Fit each door hinge onto the case hinge installed on
the side panels. Temporarily secure the set screw with a
screwdriver and refer to the instructions below for final
adjustment of the door and hinges.
B. Conceal all exposed cams with cam covers.
Assembly is now complete.
A
B
13 A. Fit cup of 2 door hinges into large holes on both
door interiors. Secure each with 2 hinge screws per
hinge.
B. Attach 1 door pull handle to each door front with 2
pull standoffs and 2 pull screws as shown.
A
B