Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE AUDIO TOWER
Made in Denmark 2004
Page 5 of 6
15 A. Insert 2 cam screws into the back side of the drawer
front.
B. Fit drawer front onto the drawer assembly and secure the
2 cams with a screwdriver.
C. Insert 2 long machine screws through the drawer front
and the 2 metal pull standoffs, then into the threaded holes
of the metal pull. Tighten with a screwdriver.
x 2
B
A
C
16 A. With the assistance of another adult, lift case
assembly into an upright postion.
B. Fully extend drawer glides. Slide assembled drawers
onto drawer glides, fitting drawer glides into grooves on
drawer side panels.
A
B
14 Slide drawer bottom panel into the grooves at the
base of the drawer assembly.
x 2
13 A. Attach drawer side panels to drawer back panel
using 2 medium wood screws.
B. Insert 1 small cam into the front of each side panel,
making sure the arrow on the cam faces towards the holes
on the edge of the side panel.
A
B
x 2
DRAWER CONSTRUCTION