Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE AUDIO TOWER
Made in Denmark 2004
Page 4 of 6
12 Align the 8 holes in the base frame with the pilot holes
in the bottom panel and fasten with 8 long wood screws.
11 Fit each metal leg into the corner brackets of the
metal base frame. Align the holes in the legs with holes in
the brackets. Insert 1 medium machine screw through the
corner bracket into each leg and secure with a screwdriver.
10 A. Insert 8 large cams at top and bottom of side panels.
B. Insert cam screws and dowels into the top and bottom
panels. Place top and bottom panels into position as shown.
Secure by tightening cams completely.
A
B
Bottom
Panel
Top Panel
(underside)
9 Insert 5 cam screws into right side panel. Fit right
side panel into postion and secure the 5 cams on the
shelves and back panel with a screwdriver.
Right
Side
Panel