Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
LATITUDE AUDIO TOWER
Made in Denmark 2004
Page 2 of 6
3 A. Insert 4 large cams into underside of fixed shelf,
making sure arrows on each cam point towards the holes
on the shelf edge.
B. Insert 2 dowels into inner holes of left side panel.
4 A. Using a screwdriver, fasten 2 cam screws into
the outer holes of the left side panel.
B. Slide shelf over cam screws and dowels.
A
B
A
B
Fixed Shelf
(underside)
Left Side
Panel
Make sure arrows on
drawer glides point forward
Make sure this arrow points towards
the holes in the shelf edge
1 Fully extend the drawer glide. Position the first hole at
the back end of the glide over the pre-drilled hole in the left
side panel. Attach back with 1 short wood screw.
x 2
2 Retract the glide as shown. Position 1 short wood screw
over the oval hole on the external portion of the glide and
through the third hole on the inside portion of the glide.
Secure the front of the glide by fastening the short wood screw
into the pre-drilled hole.
Repeat these steps for the right side panel.
Left Side
Panel