Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Latitude Audio Tower

Customer Service 800-967-6696 | http://www.crateandbarrel.com

LATITUDE AUDIO TOWER

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

2 - side panels

(1 left, 1 right)

Made in Denmark 2004

Page 1 of 6

Thank you for purchasing

the Latitude Audio Tower.

This page lists all the contents

included in the box. Please

take time to identify the

hardware as well as the

individual components of

this product. As you unpack

and prepare for assembly,

place the contents on a

carpeted or padded area to

protect them from damage.

1 - metal

base frame

2 - drawer backs

2 - drawer fronts

1 - bottom panel

(has 8 pilot holes on underside)

2 - drawer bottoms

4 - drawer side

panels (2 left, 2 right)

2 - fixed shelves

1 - top panel

2 - small back panels

1 - large back panel

2 - adjustable shelves

32 - wood

dowels

8 - long

wood screws

8 - short

wood screws

18 - large cams

4 - small cams

22 - cam

screws

18 - cam

covers

4 - long

machine screws

4 - short

machine screws

4 - medium

wood screws

4 - drawer

glides

8 - shelf

pins

2 - metal pull handles

4 - metal pull standoffs

4 - metal legs

1 - stretcher

4 - medium

machine screws

Summary of content (6 pages)

PAGE 1
LATITUDE AUDIO TOWER HARDWARE Thank you for purchasing the Latitude Audio Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
LATITUDE AUDIO TOWER Left Side Panel x2 Make sure arrows on drawer glides point forward 1 Fully extend the drawer glide. Position the first hole at the back end of the glide over the pre-drilled hole in the left side panel. Attach back with 1 short wood screw. Make sure this arrow points towards the holes in the shelf edge 2 Retract the glide as shown. Position 1 short wood screw over the oval hole on the external portion of the glide and through the third hole on the inside portion of the glide.
PAGE 3
LATITUDE AUDIO TOWER Fixed Shelf Stretcher x2 5 Using a screwdriver, turn 2 cams 90 degrees clockwise to secure the shelf panel to the left side panel. 6 Repeat steps 3-5 using 4 large cams, 2 cam screws & 4 wood dowels for the remaining fixed shelf and stretcher. A A Small Back Panel B Small Back Panel B C 7 A. Insert 4 dowels into sides of each small back panel. Align dowels with holes in the side panel and fit into postion. B. Insert 2 dowels into sides of each shelf and stretcher. C.
PAGE 4
LATITUDE AUDIO TOWER Right Side Panel A Top Panel (underside) B 9 Insert 5 cam screws into right side panel. Fit right side panel into postion and secure the 5 cams on the shelves and back panel with a screwdriver. 11 Fit each metal leg into the corner brackets of the metal base frame. Align the holes in the legs with holes in the brackets. Insert 1 medium machine screw through the corner bracket into each leg and secure with a screwdriver. Bottom Panel 10 A.
PAGE 5
LATITUDE AUDIO TOWER DRAWER CONSTRUCTION A B x2 x2 13 A. Attach drawer side panels to drawer back panel using 2 medium wood screws. B. Insert 1 small cam into the front of each side panel, making sure the arrow on the cam faces towards the holes on the edge of the side panel. 14 Slide drawer bottom panel into the grooves at the base of the drawer assembly. A B B A C x2 15 A. Insert 2 cam screws into the back side of the drawer front. B.
PAGE 6
LATITUDE AUDIO TOWER A B 17 Secure drawers to drawer glides by inserting short machine screws through the drawer side panel into the corresponding threaded first hole on the drawer glide. 18 A. Determine desired shelf location and insert 4 shelf pins per shelf into pre-drilled holes. B. Place adjustable shelves into position, making sure holes on underside of shelves engage the shelf pins. 20 Assembly is now complete. CLEANING AND CARE 19 Conceal all exposed cams by inserting cam covers.