Assembly Instruction

LANDON 48” DESK
Made in China - r06 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 A) Insert 4 wood dowels into back frame as shown.
B) Fit dowels of back frame into corresponding holes
of desktop assembly.
2 A) Attach back frame to desktop assembly with 4 bolts as
shown. Secure, but do not over tighten, bolts with phillips head
screwdriver.
B) Open drawer assembly and secure desktop assembly to
left and right side frames with 2 small screws per corner
block as shown. Secure, but do not over tighten, screws with
a screwdriver.
back frame
NOTE: Do not over
tighten the screws
desktop
assembly
NOTE: Do not over
tighten the bolts
4 Fit dowels of left and right side frames into correspond-
ing holes of back frame as shown.
back frame
B
back frame
drawer
assembly
corner
block
A
B
3 A) Insert 5 wood dowels into left and right side
frames as shown.
B) With assistance of another adult, fit dowels of side
frames into corresponding holes of apron. Using a
screwdriver, secure each side frame to crossbar with 1
large screw as shown.
left side
frame
right side
frame
apron
A
B
B
right side
frame
left side
frame
NOTE: Apron installs
under drawer body
assembly
A