Assembly Instruction

LANDON TALL BOOKCASE
Made in China - r03 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 A) Fit dowels of right side frame into
corresponding holes of 4 shelves and 1 bottom
panel as shown. Secure each panel with 2
bolts, using a phillips head screwdriver. Do
not over tighten the bolts.
B) Fit dowels of left side frame into
corresponding holes of 4 shelves and 1 bottom
panel as shown. Secure each panel with 2
bolts.
3 With assistance of another adult, fit dowels of
assembly into corresponding holes of top panel.
Secure top panel with 4 bolts as shown.
NOTE: Do not over
tighten the bolts
right side frame
left side frame
bottom
panel
NOTE: Make sure front edge of bottom
panel/shelves are positioned as shown
during assembly
NOTE: Do not over
tighten the screws
shelf
shelf
shelf
A
B
4 Attach back panel to assembly with 39 back screws,
using a screwdriver. Do not over tighten the screws. With
assistance of another adult, position unit upright.
Assembly is now complete.
back
panel
top panel
shelf