Assembly Instruction

LANDON 65” MEDIACONSOLE
MadeinChina -r06 Page2of5
CustomerService800.967.6696 | Latestinstructionsavailableatwww.crateandbarrel.com
NOTE:Donotover
tighten the bolts
left and right
side partitions
B
A
1 A) Insert 4 wood dowels into left and right side
partitions as shown.
B) Insert 2 wood dowels into left and right side
panels as shown.
A
B
left and right
side panels
2 Insert 4 wood dowels into bottom panel as shown.
bottom
panel
3 A) Fit dowels of bottom panel into corresponding
holes of left and right side panels as shown.
B) Secure each side panel with 2 bolts as shown, using
a phillips head screwdriver. Do not over tighten the
bolts.
A
A
B
B
4 A) Fit dowels of partitions into corresponding holes
of bottom panel as shown.
B) Secure each parition with 3 large screws as shown,
using a screwdriver. Do not over tighten the screws.
left side
panel
right side
panel
bottom
panel
NOTE:Make sure apron of
bottom panel is positioned
towards the front of assembly
as shown
left
partition
right
partition
NOTE:Donotover
tighten the screws