Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Landon 65" Media Console

COMPONENTS

MadeinChina -r06 Page1of5

LANDON 65” MEDIACONSOLE

ASSEMBLYHARDWARE

TOOLSREQUIRED

Missinghardware?Pleasecall

800.606.6387 forreplacements.

(Werecommenedtheuseofhandtoolsinsteadpowertools)

WALLMOUNTINGHARDWARE

CustomerService800.967.6696 | Latestinstructionsavailableatwww.crateandbarrel.com

Thank you for purchasing the Landon 65” Media

Stand. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note:2peoplearerequiredtosafelyassemblethisproduct.

16 - wood

dowels

1 - small

screw

1 - large

screw

1 - plastic

anchor

1 - wall

strap

22 - back

screws

6 - large

screws

12 - bolts

16 - shelf

pins

4 - hinges 4 - magnets 8 - magnet

screws

8 - small

screws

phillips head screwdriver

2 - side panels

(1 left, 1 right)

2 - partitions

(1 left, 1 right)

2 - center

supports

4 - adjustable

shelves

2 - doors

(1 left, 1 right)

1 - top

panel

1 - back

panel

1 - bottom

panel

Summary of content (5 pages)

PAGE 1
LANDON 65” MEDIA CONSOLE ASSEMBLY HARDWARE 16 - wood dowels 16 - shelf pins 12 - bolts 4 - hinges 22 - back screws 6 - large screws 4 - magnets 8 - small screws 8 - magnet screws WALL MOUNTING HARDWARE Thank you for purchasing the Landon 65” Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
LANDON A 65” MEDIA CONSOLE left and right side partitions bottom panel B left and right side panels 1 A) Insert 4 wood dowels into left and right side partitions as shown. B) Insert 2 wood dowels into left and right side panels as shown. NOTE: Make sure apron of bottom panel is positioned towards the front of assembly as shown 2 Insert 4 wood dowels into bottom panel as shown.
PAGE 3
LANDON 65” MEDIA CONSOLE top panel center support NOTE: Make sure crossbars of top panel are positioned towards the back during asaembly as shown. 5 With assistance of another adult, fit dowels of assembly into corresponding holes of top panel and secure with 8 bolts as shown. 6 Attach 2 center supports to bottom panel as shown. Turn each support clockwise to secure. A back panel B A adjustable shelf 7 With the assistance of another adult, position unit as shown.
PAGE 4
LANDON 65” MEDIA CONSOLE A B side panel hinge door hinge left and right doors A magnet 9 Attach 2 hinges to left and right doors with 2 small screws per hinge, using a screwdriver. 10 A) Attach 2 magnets to top and bottom panels with 2 magnet screws per magnet. Secure, but do not over tighten, with a phillips head screwdriver. B) Fit door hinges into corresponding side panel hinges as shown. Using a screwdriver, secure each hinge assembly with 1 preassembled screw. Assembly is now complete.
PAGE 5
LANDON 65” MEDIA CONSOLE OPTIONAL SAFETY MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. SIDE VIEW DETAIL wall strap (NOTE: Insert screws 3/4"-1" from the edge of the strap) small screw A) Determine the final location of unit.