Assembly Instruction

OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A) Determine the final location of unit. Mark position on the wall,
approximately 2" below the top of unit as shown.
B) Drill a pilot hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in diameter
than the plastic anchor. Gently tap the plastic anchor until the
flange of the plastic anchor is flush with the wall.
C) Insert large screw through end of wall strap and through the
plastic anchor in the wall as shown.
D) Insert small screw through end wall strap and into the top
back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
small
screw
wall strap
(NOTE: Insert screws
3/4"-1" from the
edge of the strap)
large
screw
WALL
SIDE VIEW DETAIL
plastic
anchor
LANDON BOOKCASE
Made in China - r03 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com