Assembly Instruction

Made in China - r03 Page 1 of 3

Thank you for purchasing the Landon Bookcase. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LANDON BOOKCASE

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - top panel 3 - shelves 1 - back panel

1 - bottom panel

2 - side frames

(1 left, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

20 - bolts 34 - back

screws

20 - wood

dowels

COMPONENTS

WALL MOUNTING HARDWARE

1 - wall strap 1 - small

screw

1 - large

screw

1 - plastic

anchor

Missing hardware? Please call 800.606.6387 for replacements.

PAGE 1
LANDON BOOKCASE ASSEMBLY HARDWARE 20 - bolts 20 - wood dowels 34 - back screws WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Landon Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
LANDON BOOKCASE A NOTE: Do not over tighten the bolts right side frame shelf shelf shelf bottom panel B left and right side panels left side frame NOTE: Make sure front edge of bottom panel/shelves are positioned as shown during assembly 1 Insert 10 wood dowels into left and right side frames as shown. 2 A) Fit dowels of right side frame into corresponding holes of 3 shelves and 1 bottom panel as shown. Secure each panel with 2 bolts, using a phillips head screwdriver.
PAGE 3
LANDON BOOKCASE OPTIONAL SAFETY MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Determine the final location of unit. Mark position on the wall, approximately 2" below the top of unit as shown. B) Drill a pilot hole in the wall stud.