Assembly Instruction

KIPLING ROUND EXTENSION DINING TABLE
Made in China r04 Page 2 of 3
2 Keep pedestal assembly steady with the assistance
of another adult. Fit metal plate into base of pedestal
assembly by aligning plate with grooves as shown.
Secure plate with 2 screws using a Phillips head
screwdriver and 1 hanger bolt with a hex wrench.
3 A) With the assistance of another adult, carefully
position assembled unit upright. Insert 2 wood
dowels into pedestal assembly as shown. Press
firmly to secure.
B) Fit tabletop onto pedestal assembly by aligning
corresponding holes with dowels.
4 A) With the assistance of another adult, slide
tabletop sections apart by unlocking the 2 metal
clasps as shown.
B) Insert 4 bolts into tabletop as shown. Fully tighten
bolts with an Allen wrench,.
5 Push both tabletop ends towards the center.
Secure tabletop by latching the 2 metal clasps.
Assembly is now complete.
A
B
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com
CLOSED & LOCKED
POSITION
OPEN & UNLOCKED
POSITION