Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
ASSEMBLY
A) With the assistance of another adult,
place tabletop face down onto a clean,
padded surface. Insert threaded bolts of
each leg into tabletop as shown. Loosely
attach each leg with 2 nuts, 2 spring
washers and 2 flat washers as shown.
B) Attach threaded stud of each foot
through crossbar frame and into each leg
as shown. Turn each foot clockwise to
secure. At this point, fully tighten all nuts in
legs with a hex wrench. Carefully position
assembly upright.
Assembly is now complete.
A
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
leg
nut
flat
washer
B
spring
washer
Made in Indonesia - r03 Page 1 of 1
Thank you for purchasing the Kipling High Dining
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
KIPLING HIGH DINING TABLE
Missing hardware? Please call 800.606.6387 for replacements.
8 - nuts 8 - flat
washers
1 - tabletop 1 - crossbar
frame
4 - feet
8 - spring
washers
4 - legs
hex wrench (included)
Customer Service 800.967.6696 | www.crateandbarrel.com