Assembly Instruction

Made in China - r06 Page 1 of 2

Thank you for purchasing the Kingston Two-Drawer

Coffee Table. This page

lists all the contents included

in the box. Please take the time

to identify the hardware

as well as the individual components

to this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

KINGSTON TWO-DRAWER COFFEE TABLE

4 - pull

screws

8 - bolts 8 - spring

washers

8 - flat

washers

2 - pulls

phillips head screwdriver

1 - tabletop

(pre-assembled

drawers)

2 - right and left

side frames

1 - shelf

1 Carefully remove 2 drawers from tabletop as shown.

Set drawers aside until further instructions.

Customer Service 800.967.6696 | www.crateandbarrel.com

4 - screws

PAGE 1
KINGSTON TWO-DRAWER COFFEE TABLE HARDWARE 4 - pull screws 2 - pulls Thank you for purchasing the Kingston Two-Drawer Coffee Table. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 8 - bolts 8 - spring washers 8 - flat washers 4 - screws Missing hardware? Please call 800.606.
PAGE 2
KINGSTON TWO-DRAWER COFFEE TABLE B 2 With the assistance of another adult, carefully place tabletop upside down onto a clean, padded surface. Loosely attach left side frame into table top with 4 bolts, 4 spring washers and 4 flat washers as shown. A 3 A. Loosely attach right side frame into assembled unit with 4 bolts, 4 spring washers and 4 flat washers as shown. B. Carefully fit notches of shelf into corresponding notches in the legs. Secure shelf with 4 screws as shown.