Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Kingston Tall Cabinet

ASSEMBLY HARDWARE

COMPONENTS

Page 1 of 4

Thank you for purchasing the Kingston Tall Cabinet.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

KINGSTON TALL CABINET

4 - cams 4- cam

screws

19 - small

screws

1- pull 2 - pull

screws

18 - bolts 18- spring

washers

8- shelf

pins

18- flat

washers

1 - front frame

1 - top panel

1 - bottom panel

1 - fixed shelf

1 - left

side panel

1 - back panel

1 - right

side panel

2 - adjustable shelves

TOOLS REQUIRED

Missing hardware? Please call 800.606.6387 for replacements.

WALL MOUNTING HARDWARE

phillips head screwdriver

4 - medium

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

Made in Vietnam - r05 Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
KINGSTON TALL CABINET ASSEMBLY HARDWARE 4 - cams 4- cam screws 18 - bolts 18- spring washers 1- pull 2 - pull screws 19 - small screws 8- shelf pins 18- flat washers WALL MOUNTING HARDWARE Thank you for purchasing the Kingston Tall Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
KINGSTON TALL CABINET A B A Make sure arrows on each cam point towards nearest edge with holes. 1 A) Insert 2 cam screws into left panel as shown. Secure with a Phillips head screwdriver, but do not over tighten cam screws. Repeat step for right panel. B) Insert 4 cams into holes located on bottom panel. Make sure arrows on each cam point towards nearest edge with holes. B 2 A) Attach left and right side panels onto bottom panel and fixed shelf by aligning cam screws with corresponding holes.
PAGE 3
KINGSTON TALL CABINET A B 5 Attach back panel onto assembled unit as shown, with 19 small screws. Secure with a Phillips head screwdriver, but do not over tighten the screws. 6 A) Insert 8 shelf pins into assembled unit at desired shelf levels. Press firmly to secure. B) Fit adjustable shelf into assembled unit, and place on shelf pins. Make sure shelf is securely supported by the shelf pins. Repeat step for additonal shelf. Assembly is now complete.
PAGE 4
KINGSTON TALL CABINET C plastic anchor wall F strap wall bracket wall bracket large D screw A 7 medium screw Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to top of unit using 2 medium screws as shown.