Assembly Instruction

KINGSTON LOW CABINET
Made in China R04
Page 3 of 3
5 Attach assembled unit onto top panel as shown,
by aligning holes with corresponding wood dowels.
Secure with 8 bolts, 8 spring washers, and 8 flat
washers using a Phillips head screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
6 Attach back panel onto assembled unit as shown,
with 19 screws. Secure with a Phillips head
screwdriver, but do not over tighten the screws.
7 A) Insert 1 shelf pin into back of front frame as
shown. Press firmly to secure.
B) Attach pull onto door frame as shown with 2 pull
screws. Secure with Phillips head screwdriver.
Repeat step for additional pull.
A
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com
Back of
front frame
VIEW FROM
BELOW