Assembly Instruction

KINGSTON CORNER MEDIA STAND
Page 3 of 3
5 Secure all cams with Phillips head screwdriver. Turn
each cam clockwise until it securely engages each cam
screw.
6 With assistance of another adult, position assembled
unit upright. Fit top panel onto assembled unit by aligning
dowels with corresponding holes. Secure top panel with 10
spring washers, 10 flat washers, and 10 bolts. Secure
with a Phillips head screwdriver.
7 Attach pull onto pre-assembled door on front frame as
shown with 2 pull screws. Repeat for additional pull.
Assembly is now complete.
Cam in
unlocked
position
Cam in
locked
position
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
Made in Vietnam - r06
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com