Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Page 1 of 3

Thank you for purchasing the Kingston Corner Media

Stand. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

KINGSTON CORNER MEDIA STAND

Missing hardware? Please call 800.606.6387

for replacements.

1 - top

panel

Phillips head screwdriver

1 - bottom

panel

1 - shelf

panel

1 - back

panel

1 - front

frame

2- pulls

4 - pull

screws

30 - bolts 30- spring

washers

30- flat

washers

2 - angled back

panels

(1 - left, 1- right)

2 - side panels

(1 - left, 1- right)

2 - cams

2 - cam

screws

Made in Vietnam - r06

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
KINGSTON CORNER MEDIA STAND HARDWARE Thank you for purchasing the Kingston Corner Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 30 - bolts 30- spring washers 30- flat washers 2 - cams 4 - pull screws 2- pulls 2 - cam screws Missing hardware? Please call 800.606.
PAGE 2
KINGSTON CORNER MEDIA STAND NOTE: Do not over tighten the bolts. B A B A 1 NOTE: In steps 1-5, unit is assembled upside down. A) Attach bottom panel and shelf panel onto left and right side panels as shown with 2 spring washers, 2 flat washers, and 2 bolts per panel. Secure with a Phillips head screwdriver, but do not over tighten the bolts. B) Attach back panel onto assembled unit as shown with 4 spring washers, 4 flat washers, and 4 bolts.
PAGE 3
KINGSTON CORNER MEDIA STAND Cam in unlocked position Cam in locked position 5 Secure all cams with Phillips head screwdriver. Turn each cam clockwise until it securely engages each cam screw. 6 With assistance of another adult, position assembled unit upright. Fit top panel onto assembled unit by aligning dowels with corresponding holes. Secure top panel with 10 spring washers, 10 flat washers, and 10 bolts. Secure with a Phillips head screwdriver.