Assembly Instruction

KINGSTON CONSOLE TABLE
Made in China - r05 Page 2 of 3
2 Carefully remove 2 drawers from tabletop. Set drawers
aside until further instructions.
1 A) Insert 2 cam screws into left and right side frames
as shown. Secure, but do not over tighten screws with a
phillips head screwdriver.
B) Insert 4 cams into shelf as shown. Make sure arrows
on each cam points towards nearest edge with holes.
Make sure arrows
on each cam points
towards nearest edge
with holes.
3 Place tabletop upside down onto a clean padded
surface as shown. Attach left side frame to tabletop with
4 bolts, 4 spring washers, and 4 flat washers. Secure
bolts with a screwdriver.
A
B
right and left
side frames
shelf
A
B
4 Fit dowels of shelf into corresponding holes of left side
frame as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
Customer Service 800.967.6696 | www.crateandbarrel.com