Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r05 Page 1 of 3

Thank you for purchasing the Kingston Console Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

KINGSTON CONSOLE TABLE

Missing hardware? Please call

800.606.6387 for replacements.

4 - pull

screws

8 - bolts 8 - spring

washers

8 - flat

washers

4 - cam

screws

4 - cams

2 - pulls

1 - left

side frame

1 - right

side frame

1 - tabletop

(2 drawers pre-installed)

1 - shelf

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

PAGE 1
KINGSTON CONSOLE TABLE HARDWARE Thank you for purchasing the Kingston Console Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 4 - pull screws 8 - bolts 8 - spring washers 8 - flat washers 4 - cam screws 4 - cams Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
KINGSTON CONSOLE TABLE A right and left side frames B shelf Make sure arrows on each cam points towards nearest edge with holes. 1 A) Insert 2 cam screws into left and right side frames as shown. Secure, but do not over tighten screws with a phillips head screwdriver. B) Insert 4 cams into shelf as shown. Make sure arrows on each cam points towards nearest edge with holes. 3 Place tabletop upside down onto a clean padded surface as shown.
PAGE 3
KINGSTON CONSOLE TABLE A A B B 5 A) Attach right side frame to assembled unit as shown with 4 bolts, 4 spring washers, and 4 flat washers. Secure bolts with a screwdriver. B) With a screwdriver, turn each cam clockwise until it securely engages each cam screw. 6 Attach 1 pull per drawer with 2 pull screws as shown. Secure bolts with screwdriver. Insert drawers back into tabletop of assembled unit. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth.