Assembly Instruction

Made in China - r06 Page 2 of 2
KINGSTON BUNCHING TABLE
2 Fit cam screws of left and right side panels and
dowels of bottom panel into corresponding holes as
shown. Using a screwdriver, turn each cam clockwise
until it securely engages each cam screw.
3 A) Carefully place back panel onto a clean, padded
surface as shown. Fit dowels of assembled unit into
corresponding holes of back panel as shown. Using a
screwdriver, secure assembly with 4 bolts, 4 spring
washers, and 4 flat washers as shown.
B) Fit holes of front frame onto dowels of assembled unit
as shown. Using a screwdriver, secure assembly with 4
bolts, 4 spring washers, and 4 flat washers as shown.
bottom panel
front
frame
back
panel
left side
panel
right side
panel
4 Fit holes of top panel onto dowels of assembled unit
as shown. Secure top panel with 5 bolts, 5 spring
washers, and 5 flat washers.
Assembly is now complete.
VIEW FROM
BELOW
Customer Service 800.967.6696 | www.crateandbarrel.com
A
A
B
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.