Assembly Instruction

Made in China - r05 Page 4 of 4

KINGSTON

MEDIA TOWER

7 Safety Mounting Instructions

For added safety and stability, it is recommended that the

wall mounting hardware be installed. For safe mounting, it

is essential to use wall anchors appropriate to your wall type

(i.e. plaster, drywall, concrete, etc.). Mount to wood studs

whenever possible.

A) Attach wall bracket to top of bookcase using 2 medium

screws as shown.

B) Determine the final location of bookcase. Mark position

on the wall, approximately 2" below the wall bracket

mounted to the back of the cabinet.

C) Drill a hole in the wall stud. If the wall stud is not

available, drill a hole in the wall that is slightly smaller in

diameter than the anchor. Gently tap the plastic anchor

until the flange of the anchor is flush with the wall.

D) Attach wall bracket to the wall by inserting 2 large

screws, and into the plastic anchor in the wall.

E) Place the unit so the wall brackets on the back edge are

aligned with the wall brackets on the wall.

F) Lace one end of the wall strap through both brackets,

and into the other end of the strap.

G) Pull the strap tightly until secure.

H) Repeat steps A-G for remaining wall brackets and wall

straps.

NOTE:

If you are unsure about your wall type or what

mounting method you should use, consult a

qualified professional or your local hardware

store.

medium

screw

wall

bracket

plastic

anchor

large

screw

wall

strap

wall

bracket