Assembly Instruction

Made in China - r05 Page 2 of 4
KINGSTON
MEDIA TOWER
1 A) Insert 2 cam screws into right/left side panels as
shown. Secure cam screws with a phillips head
screwdriver.
B) Insert 6 cams into bottom panel as shown. Make sure
arrows on each cam points toward nearest edge with holes.
A
right/left
side panels
bottom
panel
B
NOTE: Make sure
arrows on each
cam points towards
nearest edge with
holes.
2 A) Fit dowels of fixed shelf and bottom panel into
corresponding holes of right/left side panel as shown.
Secure all cams with a screwdriver. Make sure cams securely
engage each cam screw.
B) Secure fixed shelf with 4 large bolts, 4 spring washers,
and 4 flat washers as shown. Fasten bolts with a
screwdriver.
A
B
B
A
flat washer
spring washer
large bolt
bottom
panel
fixed
shelf
3 Insert 2 cam screws into front frame as shown.
front
frame
B
B
A
4 A) Fit dowels of assembled unit into corresponding holes
of front frame as shown. Secure 2 cams on bottom panel
with a screwdriver.
B) Secure front frame with 6 large bolts, 6 spring
washers, and 6 flat washers as shown.
front
frame