Assembly Instruction

KINGSTON 65” MEDIA STAND
Made in China - r03 Page 2 of 3
1 Fit pre-assembled dowels of left/right partitions
into corresponding holes of bottom panel as shown.
Secure bottom panel with 4 large screws as shown,
using a phillips head screwdriver.
2 A) Insert 2 cam screws into left/right side panels as shown.
Secure cam screws with a screwdriver.
B) Insert 4 cams into bottom panel as shown. Make sure arrows
on each cam points toward nearest edge with holes.
C) Fit dowels of bottom panel into corresponding holes of
left/right side panels as shown. With a screwdriver, turn cams
clockwise until it securely engages each cam screw.
bottom
panel
left
partition
right
partition
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes.
left side
panel
right side
panel
A
B
front
frame
top
panel
center
support
A
A
B
B
C
A
A
C
B
C
B
front
frame
Customer Service 800.967.6696 | www.crateandbarrel.com
3 A) Insert 3 cam screws into front frame as shown.
B) Insert 3 cams into bottom panel of assembled unit as shown.
C) With the assistance of another adult, fit dowels of assembled
unit into corresponding holes of front frame as shown. Secure
all cams. Secure front frame with 4 large bolts, 4 spring
washers, and 4 flat washers as shown, using a screwdriver.
4 A) With the assistance of another adult, position assembly as
shown. Fit dowels of assembled unit into corresponding holes
of top panel as shown. Secure top panel with 12 large bolts,
12 spring washers, and 12 flat washers as shown.
B) Attach 2 center supports to assembled unit as shown with 2
large bolts, 2 spring washers, and 2 flat washers per support
as shown.
K
i
j
d
e
f