Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Kingston 65" Media Console and Towers

HARDWARE

TOOLS REQUIRED

COMPONENTS

BOX 1

COMPONENTS

BOX 1

Made in China - r02 Page 1 of 3

Thank you for purchasing the Kingston 65” Media

Stand. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

KINGSTON 65” MEDIA STAND

Missing hardware? Please call

800.606.6387 for replacements.

20 - small

screws

4 - large

screws

6 - small

bolts

20 - large

bolts

20 - spring

washers

20 - flat

washers

3 - pulls

16 - shelf

pins

7 - cam

screws

7 - cams

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - front

frame

1 - top

panel

1 - bottom

panel

1 - back

panel

2 - side panels

(1 left, 1 right)

2 - small

adjustable shelves

2 - partitions

(1 left, 1 right)

1 - center

support

2 - large

adjustable shelves

Summary of content (7 pages)

PAGE 1
KINGSTON 65” MEDIA STAND HARDWARE Thank you for purchasing the Kingston 65” Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
KINGSTON 65” MEDIA STAND right partition A right side panel left partition C B left side panel NOTE: Make sure arrows on each cam points toward nearest edge with holes. bottom panel 1 Fit pre-assembled dowels of left/right partitions into corresponding holes of bottom panel as shown. Secure bottom panel with 4 large screws as shown, using a phillips head screwdriver. 2 A) Insert 2 cam screws into left/right side panels as shown. Secure cam screws with a screwdriver.
PAGE 3
KINGSTON 65” MEDIA STAND A C back panel A B C 5 With the assistance of another adult, position unit upright. Attach back panel with 20 small screws. Secure screws with a screwdriver. large adjustable shelf large adjustable shelf small adjustable shelves 6 A) Insert 16 shelf pins at desired shelf heights as shown. B) Place 2 small and large adjustable shelves into assembled unit. Make sure each shelf is securely supported by shelf pins. C) Attach 1 pull to each door with 2 small bolts as shown.
PAGE 4
KINGSTON MEDIA TOWER ASSEMBLY HARDWARE 6 - cam screws 6 - cams 16 - flat washers 16 - large bolts 20 - small screws 16 - spring washers 1 - pull 2 - small bolts 12 - shelf pins WALL MOUNTING HARDWARE Thank you for purchasing the Kingston Media Tower. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 5
KINGSTON MEDIA TOWER B flat washer spring washer large bolt A A right/left side panels fixed shelf B B A bottom panel NOTE: Make sure arrows on each cam points towards nearest edge with holes. 1 A) Insert 2 cam screws into right/left side panels as shown. Secure cam screws with a phillips head screwdriver. B) Insert 6 cams into bottom panel as shown. Make sure arrows on each cam points toward nearest edge with holes.
PAGE 6
KINGSTON MEDIA TOWER top panel back panel 5 Fit dowels of assembled unit with corresponding holes of top panel as shown. Secure top panel with 6 large bolts, 6 spring washers, and 6 flat washers as shown. 6 Attach back panel to assembled unit with 20 small screws as shown. Secure screws with screwdriver. A A B top adjustable shelves CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 7
KINGSTON MEDIA TOWER C plastic anchor F wall strap wall bracket wall bracket large D screw A 7 medium screw Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to top of bookcase using 2 medium screws as shown.