Assembly Instruction

KINGSTON 52” MEDIA STAND
Made in Vietnam - r07 Page 3 of 3
ADJUSTING THE LEVELERS
If the doors do not appear square or aligned,
try adjusting the levelers on the bottom of
each leg.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
6 Attach back panel onto assembled unit as shown,
with 20 screws. Secure with a Phillips head
screwdriver.
7 A) Insert 16 shelf pins into assembled unit at
desired shelf levels. Press firmly to secure.
B) Place 4 adjustable shelves into assembled unit.
B
A
8 Fit the bottom rollers of the right sliding door
panel into back groove. Depress levers located at
the top of the door, tilt the door into the groove in the
top panel. Release the levers to secure door. Repeat
steps for left sliding door panel.
Assembly is now complete.
A
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com