Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Kenton Double Cube with Two Doors

HARDWARE

Thank you for purchasing the Kenton

Double Cube with Two Doors. This page

lists all the contents included in the box.

Please take time to identify the hardware as

well as the individual components of this

product. As you unpack and prepare for

assembly, place the contents on a carpeted

or padded area to protect them from

damage.

COMPONENTS

TOOLS REQUIRED

Phillips head screwdriver

KENTON DOUBLE CUBE WITH TWO DOORS

Page 1 of 3

Made in China - r03

Missing hardware? Please call 800.606.6387 for replacements.

12 - cam

screws

12 - cams

12 - wood

dowels

1 - back panel

4 - hinges

1 A. Insert 4 wood dowels into the outer holes on the

edges of the 2 side panels and 1 middle panel.

B. Insert 4 cams into the large holes in each side panel

and middle panel. Make sure arrow on each cam points

out towards edge with dowels.

12 - cam

covers

4 - door bumpers

2 - pulls

Make sure arrow on

each cam points towards

edge with dowels

2 - end panels

(1 labeled top, 1 labeled bottom)

2 - side panels

(left labeled L, right

labeled R)

4 - bolts 16 - screws

2 - doors

1 - middle

panel

Side Panel

Middle

Panel

Side Panel

Middle

Panel

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (3 pages)

PAGE 1
KENTON DOUBLE CUBE WITH TWO DOORS HARDWARE 12 - cams 12 - cam covers Thank you for purchasing the Kenton Double Cube with Two Doors. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
KENTON DOUBLE CUBE WITH TWO DOORS B A 2 Insert 4 cam screws into inner holes of the 2 end panels as shown. Secure each screw with a phillips head screwdriver, but do not over tighten. Cam in unlocked position Cam in locked position 4 Using a phillips head screwdriver, turn each cam at the base of the side and middle panels clockwise until each cam tightly engages each cam screw. Made in China - r03 3 A.
PAGE 3
KENTON DOUBLE CUBE WITH TWO DOORS A A C B B 6 A) Attach 2 hinges to each door with 2 screws per hinge. Secure, but do not over tighten each screw with a phillips head screwdriver. B) Attach door pull to each door front with 2 bolts. C) Adhere 2 door bumpers to each door interior as shown. 7 A) Align holes in hinges with holes in side panels and attach with 2 screws per hinge. Do not over tighten the screws. If necessary, adjust the hinges to align the doors (refer to the directions below).