Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
KENTON DOUBLE CUBE WITH SHELF
Page 2 of 2
Made in China - r05
5 Repeat Steps 3 and 4 for attachment of the top panel.
Be sure that back panel is seated in the slot at the back
of the top panel before securing the 4 cams.
3 A. Place side panels into position as shown, making
sure slot on each panel lines up with slot on bottom panel.
Align dowels and cam screws and firmly press into position.
B. Slide back panel into the corresponding slot in the
bottom & side panels.
4 Using a phillips head screwdriver, turn each cam at the
base of the side panels clockwise until each cam tightly
engages the cam screw.
6 A. Insert 4 shelf pins at desired shelf height. Fit
shelf into assembly, making sure the slots on underside
of shelf are firmly seated on the shelf pins.
B. Conceal all exposed cams with cam covers.
Assembly is now complete.
A
B
Cam in
unlocked
position
Cam in
locked
position
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
B