Assembly Instruction

COMPONENTS

1 Carefully remove drawers from assembled unit. Open

drawer and locate drawer stop on back of drawer assem-

bly. Push down on tab and slide drawer assembly out as

shown. Repeat step for remaining drawer assembly.

METHOD TO REMOVE

THE DRAWERS

ASSEMBLY HARDWARE

TOOLS REQUIRED

4 - medium

screws

phillips head screwdriver

4 - large

screws

2 - wall

straps

4 - brackets 4 - plastic

anchors

MOUNTING HARDWARE

2 - connecting

brackets

Missing hardware? Please call 800.606.6387 for replacements.

8 - small

screws

(We recommend the use of hand tools instead of power tools)

Made in Vietnam - r04 Page 1 of 3

Thank you for purchasing the Kendel 44” Two Drawer

Case. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

KENDEL 44” TWO DRAWER CASE

1 - two drawer

assembly

DRAWER STOP SIDE VIEW

locked

position

unlocked

position

drawer

stop

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
KENDEL 44” TWO DRAWER CASE ASSEMBLY HARDWARE 8 - small screws 2 - connecting brackets MOUNTING HARDWARE Thank you for purchasing the Kendel 44” Two Drawer Case. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
KENDEL 44” TWO DRAWER CASE CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat and water.
PAGE 3
KENDEL 44” TWO DRAWER CASE WALL MOUNTING ASSEMBLY FOR MULTIPLE UNITS C plastic anchor wall F strap bracket bracket large D screw A medium screw 4 Safety Mounting Instructions NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. Made in Vietnam - r04 For added safety and stability, it is recommended that the wall mounting hardware be installed.