Assembly Instruction

Made in Vietnam - r05 Page 2 of 4
1 A) Attach left/right side panels to bottom panel with
2 bolts, 2 spring washers and 2 flat washers per side
panel as shown. Secure, but do not over tighten, bolts
with a phillips head screwdriver as shown.
B) Fit dowels of center panel into corresponding holes in
the bottom panel as shown.
KENDEL 44” OPEN BOOKCASE
2 Position unit upright as shown. Fit dowels of assembled
unit into corresponding holes of top panel. Secure top
panel with 4 bolts, 4 spring washers and 4 flat washers as
shown.
3 A) Insert wire managment cover into corresponding
window of back panel as shown.
B) Attach back panel with 14 small screws as shown.
Secure, but do not over tighten, screws with a
screwdriver as shown.
4 A) Insert 8 shelf pins into holes at the desired shelf
height.
B) Tilt adjustable shelves and place into assembled unit.
Make sure shelves are securely supported by shelf pins.
left side
panel
right side
panel
center
panel
bottom
panel
top
panel
back
panel
adjustable
shelves
NOTE: Do not over
tighten the bolts
NOTE: Do not over
tighten the screws
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
B
B
A
NOTE: Make sure apron of
bottom panel is facing the
front as shown
A
A
B
B
wire managment
cover