Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Kendel 44" Open Bookcase

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

4 - medium

screws

phillips head screwdriver

4 - large

screws

2 - wall

straps

4 - brackets 4 - plastic

anchors

MOUNTING HARDWARE

Made in Vietnam - r05 Page 1 of 4

Thank you for purchasing the Kendel 44” Open

Bookcase. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

KENDEL 44” OPEN BOOKCASE

Missing hardware? Please call 800.606.6387 for replacements.

22 - small

screws

8 - flat

washers

8 - spring

washers

8 - bolts8 - shelf

pins

1 - back panel2 - side panels

(1- left, 1- right)

1 - center panel

1 - bottom panel1 - top panel2 - adjustable shelves

1 - wire

management

cover

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

2 - connecting

brackets

Summary of content (4 pages)

PAGE 1
KENDEL 44” OPEN BOOKCASE ASSEMBLY HARDWARE 8 - flat washers 8 - spring washers 8 - shelf pins 22 - small screws 8 - bolts 2 - connecting brackets MOUNTING HARDWARE Thank you for purchasing the Kendel 44” Open Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
KENDEL 44” OPEN BOOKCASE NOTE: Do not over tighten the bolts top panel A right side panel bottom panel B center panel NOTE: Make sure apron of bottom panel is facing the front as shown left side panel 1 A) Attach left/right side panels to bottom panel with 2 bolts, 2 spring washers and 2 flat washers per side panel as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver as shown. B) Fit dowels of center panel into corresponding holes in the bottom panel as shown.
PAGE 3
KENDEL 44” OPEN BOOKCASE MULTIPLY UNIT ASSEMBLY 22” 22” 22” 22” 44” 44” 44” 5 If you purchased multiple Kendel Bookcases, it is suggested that every 22” and 44” bookcase be secured together as shown, connecting every 22” and 44” bookcase with 2 connecting plates. Attach each plate with 4 small screws using a screwdriver. Repeat steps for each additional bookcase. 22” bookcase (sold separately) 22” bookcase (sold separately) 44” bookcase Made in Vietnam - r05 Customer Service 800.967.
PAGE 4
KENDEL 44” OPEN BOOKCASE WALL MOUNTING ASSEMBLY FOR MULTIPLE UNITS C plastic anchor wall F strap bracket bracket large D screw A medium screw 5 Safety Mounting Instructions NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. For added safety and stability, it is recommended that the wall mounting hardware be installed.