Assembly Instruction

Made in Vietnam - r06 Page 2 of 4
1 Attach left/right side panels to bottom panel with 2
bolts, 2 spring washers and 2 flat washers per side
panel as shown. Secure, but do not over tighten, bolts
with a phillips head screwdriver.
KENDEL 22” OPEN BOOKCASE
2 Position unit upright as shown. Fit dowels of assembled
unit into corresponding holes of top panel. Secure top
panel with 4 bolts, 4 spring washers and 4 flat washers as
shown.
3 A) Insert wire management cover into
corresponding window of back panel as shown.
B) Attach back panel with 10 small screws as shown.
Secure, but do not over tighten, screws with a
screwdriver as shown.
4 A) Insert 4 shelf pins into holes at the desired shelf
height.
B) Tilt adjustable shelf and place into assembled unit.
Make sure shelf is securely supported by shelf pins.
left side
panel
right side
panel
bottom
panel
top
panel
back
panel
adjustable
shelf
NOTE: Do not over
tighten the bolts
NOTE: Do not over
tighten the screws
NOTE: Make sure apron of
bottom panel is facing the
front as shown
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
B
A
wire
managment
cover
B
B
A