Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Kendel 22" Open Bookcase

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

2 - medium

screws

phillips head screwdriver

2 - large

screws

1 - wall

straps

2 - brackets 2 - plastic

anchors

MOUNTING HARDWARE

2 - connecting

brackets

Made in Vietnam - r06 Page 1 of 4

Thank you for purchasing the Kendel 22” Open

Bookcase. This page lists all the contents included in

the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

KENDEL 22” OPEN BOOKCASE

Missing hardware? Please call 800.606.6387 for replacements.

18 - small

screws

8 - flat

washers

8 - spring

washers

8 - bolts4 - shelf

pins

1 - back panel2 - side panels

(1- left, 1- right)

1 - bottom panel1 - top panel1 - adjustable shelf

1 - wire

management

cover

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

Summary of content (4 pages)

PAGE 1
KENDEL 22” OPEN BOOKCASE ASSEMBLY HARDWARE 8 - flat washers 8 - spring washers 4 - shelf pins 18 - small screws 8 - bolts 2 - connecting brackets MOUNTING HARDWARE Thank you for purchasing the Kendel 22” Open Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
KENDEL 22” OPEN BOOKCASE NOTE: Make sure apron of bottom panel is facing the front as shown top panel right side panel bottom panel left side panel NOTE: Do not over tighten the bolts 1 Attach left/right side panels to bottom panel with 2 bolts, 2 spring washers and 2 flat washers per side panel as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver. 2 Position unit upright as shown. Fit dowels of assembled unit into corresponding holes of top panel.
PAGE 3
KENDEL 22” OPEN BOOKCASE MULTIPLY UNIT ASSEMBLY 22” 22” 22” 22” 44” 44” 44” 5 If you purchased multiple Kendel Bookcases, it is suggested that every 22” and 44” bookcase be secured together as shown, connecting every 22” and 44” bookcase with 2 connecting plates. Attach each plate with 4 small screws using a screwdriver. Repeat steps for each additional bookcase. 22” bookcase 22” bookcase (sold seperately) 44” bookcase (sold seperately) Made in Vietnam - r06 Customer Service 800.967.
PAGE 4
KENDEL 22” OPEN BOOKCASE WALL MOUNTING ASSEMBLY FOR MULTIPLE UNITS C plastic anchor wall F strap bracket bracket large D screw A medium screw 6 Safety Mounting Instructions NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. For added safety and stability, it is recommended that the wall mounting hardware be installed.