Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
Thank you for purchasing the Jackson Mirror. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
TOOLS REQUIRED
Phillips head screwdriver
A
B
C
JACKSON MIRROR
Page 1 of 1
Made in China - r02
1 A. Insert a phillips head screwdriver into the wall
anchor and press into the drywall while turning the
anchor clockwise. Fully tighten until the anchor is seated
flush with the surface of the wall. NOTE: If mounting
directly into a wall stud, do not use the wall anchor but
fasten screw directly into the wall stud.
B. Insert the screw with a screwdriver into the anchor
and leave 3/16" protruding out from the surface of the
wall.
C. With the assistance of another adult, hang the mirror
by the cable attached to the back of the frame.
Assembly is now complete.
Missing hardware? Please call 800.606.6387 for
replacements.
1 - drywall anchor 1 - screw
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
WALL MOUNTING INSTRUCTIONS:
The wall mounting hardware included with this mirror is intended for drywall installation only. Be sure to use hardware
appropriate for your wall type. Whenever possible, attach mounting hardware into a wall stud.
If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your
local hardware store.