Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
Thank you for purchasing the Jackson Folding Screen.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
TOOLS REQUIRED
Phillips head screwdriver
JACKSON FOLDING SCREEN
Page 1 of 1
Made in China - r02
1 A. Stack all 3 panels as shown, making sure that the
center panel (with holes on both sides) is in the middle of
the stack. The outer panels should have holes on
opposite sides from one another.
B. Attach hinges to panels with 4 screws per hinge as
shown in the detail illustrations. Secure all screws with a
phillips head screwdriver.
C. With the assistance of another adult lift the panel
assembly upright and unfold as shown.
Assembly is now complete.
Missing hardware? Please call 800.606.6387 for
replacements.
24 - screws
1 - center panel
(holes on both sides)
2 - outer panels
(holes on only 1 side)
6 - hinges
NOTE:
If alternate configuration is
desired (as shown to the left),
hinges between one set of panels
can be reversed so that both panels
swing in the same direction.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.