Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

Thank you for purchasing the Jackson Console

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this

product.

JACKSON CONSOLE TABLE

Page 1 of 2

Made in China - r05

1 A. Attach 2 front legs to shelf frame using 1 long

bolt, 1 lock washer and 1 washer per leg. Fully tighten

bolts with allen wrench.

B. Attach 2 back legs to the back of the shelf frame by

first inserting 1 cam screw into each leg and tightening

with a phillips head screwdriver.

C. Fit 2 cams into shelf frame as shown. Fit cam screws

of legs into holes, engaging cams. Attach legs by turning

each cam clockwise with a screwdriver until secure.

COMPONENTS

1 - glass top

1 - top frame

HARDWARE

TOOLS REQUIRED

Allen Wrench (included)  Phillips head screwdriver

Missing hardware? Please call 800.606.6387 for

replacements.

8 - short bolts 2 - long bolts

2 - washers 2 - lock washers 2 - cams

1 - shelf frame

2 - back legs

1 - glass shelf

2 - cam screws

2 - front legs

NOTE:

Do not over tighten the bolts.

PAGE 1
JACKSON CONSOLE TABLE HARDWARE 8 - short bolts 2 - washers 2 - long bolts 2 - cam screws 2 - lock washers 2 - cams Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Jackson Console Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
JACKSON CONSOLE TABLE 2 Place top frame upside down on a padded surface. Position shelf frame assembly as shown, aligning holes in legs with holes in top frame. Attach with 2 short bolts per leg, fully tightening each with the allen wrench. 3 With the assistance of another adult, lift assembly into an upright position. Carefully insert shelf glass into the shelf frame, followed by the top glass into the top frame. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth.