Assembly Instruction

Made in China - r04 Page 2 of 2
ISAAC FULL, QUEEN OR KING BED
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Remove plastic cover from headboard. Fit headboard
front into heabdoard back. With the assistance of another
adult, place headboard front and back upside down onto
a clean, padded surface as shown. Secure headboard
back to headboard front with 10 small bolts, using an
allen wrench as shown. Do not over tighten the bolts.
NOTE: Do not over
tighten the bolts
headboard
back
headboard
front
2 A) Fit brackets of foot rail into left and right side rails as
shown. Secure foot rail to left and right side rails with 2
small bolts per side as shown.
B) Attach left and right side rails to headboard assembly
with 2 large bolts per side as shown, using an allen wrench.
A
B
3 A) Attach support leg to center support rail with 4 small
bolts as shown, using an allen wrench.
B) Fit center support rail into brackets of headboard and
footboard as shown. Push down firmly to make sure center
support rail is securely attached.
left side
rail
right side
rail
foot rail
headboard
assembly
support
leg
center
support
rail
4 With assistance of another adult, carefully align slat
assembly with pre-installed rail on each side rail.
Assembly is now complete.
NOTE: Make sure straps of
slat assembly face down
slat
assembly
A
B
support
leg
A