Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
INFINITY CHAIR
Page 3 of 3
Made in Taiwan
5 Secure leg assembly with 1 short screw and 1 split
washer. Fully tighten all 5 screws with allen wrench
provided.
6 Insert 4 feet into the legs. Gently tap with a hammer if
necessary.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
x 5
7 Slide all 4 leg supports towards the center as far
as possible, until they can no longer be moved.
Assembly is now complete.
IMPORTANT:
After tightening all screws,
slide all 4 leg supports
towards the center until they
can no longer be moved.