Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
3 Loosely attach upper leg to seat bottom using 2 long
screws and 2 split washers. Do not fully tighten.Make
sure arrow on leg points towards the front of the seat.
INFINITY CHAIR
Page 2 of 3
Made in Taiwan
4 Loosely attach lower leg to seat bottom with 2 long
screws and 2 split washers. Do not fully tighten. Make sure
arrow on leg points towards the front of the seat.
2 A. Fit leg mount onto the leg and slide past the hole in the leg. Make sure the small hole in the leg mount faces up.
B. Place the mounting plate onto the leg as shown, aligning hole in plate with the hole in the leg.
C. Slide the leg mount over the mounting plate as shown, aligning hole in leg mount with hole in the mounting plate and leg.
Note: Arrow on
leg points
towards
front of seat
Arrow label
faces forward
Small hole
faces up
Note: Arrow on
leg points
towards
front of seat
x 4
A
C
B
Align these
holes