Assembly Instruction

HUXLEY SMALL SIDEBOARD
Made in China - r11 Page 3 of 5
6 A) Slide drawer bottom into corresponding grooves of
drawer front and back as shown.
B) Attach drawer sides to assembled unit with 4 large
screws per side, using a screwdriver.
Repeat steps for remaining drawer assembly.
7 A) Insert 8 shelf pins at desired shelf heights. Press
shelf pins firmly to secure.
B) Place 2 adjustable shelves onto shelf pins. Make sure
shelves are securely supported by each shelf pin.
C) Attach 2 magnets to bottom panel as shown. Secure
each magnet with 2 magnet screws, using a screwdriver.
5 Attach back panel to assembled unit with 24 medium
screws as shown. Secure, but do not over tighten the
screws, using a screwdriver.
back panel
drawer
back
drawer
front
drawer
side
drawer
side
drawer
bottom
adjustable
shelf
shelf pin
NOTE: Do not over
tighten the screws
B
A
A
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
B
C
8 Attach 2 door hinges to left and right doors with 2 small
screws per hinge as shown, using a screwdriver.
left door
right door