Assembly Instruction

HUXLEY SMALL SIDEBOARD
Made in China - r11 Page 2 of 5
1 A) Insert 2 wood dowels into left and right side panels
as shown.
B) Insert 4 wood dowels into partition as shown.
C) Insert 4 wood dowels into bottom panel as shown.
2 With the assistance of another adult, fit dowels of
bottom panel into corresponding holes of left and right
side panels as shown. Secure bottom panel to left and
right side panels with 4 large bolts as shown, using a
phillips head screwdriver. Do not over tighten the bolts.
left side
panel
right side
panel
NOTE: Do not over
tighten the bolts
left and right
side panels
A
partition
B
bottom panel
C
bottom panel
NOTE: Make sure front
edge of bottom panel is
positioned as shown
partition
top
panel
NOTE: Do not over
tighten the bolts
3 With the assistance of another adult, position
assembled unit on back, as shown. Fit dowels of
partition into corresponding holes of bottom panel.
Secure partition to bottom panel with 3 large
screws, using a phillips head screwdriver. Do not
over tighten the screws.
4 With the assistance of another adult, position assembled
unit upright. Fit dowels of left/right side panels and parti-
tion into corresponding holes of top panel as shown. Secure
top panel with 6 large bolts as shown, using screwdriver.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com