Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Huxley Small Sideboard

Made in China - r11 Page 1 of 5

Thank you for purchasing the Huxley Small Sideboard.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

HUXLEY SMALL SIDEBOARD

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 - drawer fronts

(1 left, 1 right)

1 - back panel

1 - top

panel

2 - side panels

(1 left, 1 right)

2 - doors

(1 left, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

(We recommend the use of hand tools instead of power tools)

8 - shelf

pins

19 - large

screws

12 - wood

dowels

COMPONENTS

10 - large

bolts

4 - pulls

4 - hinges

phillips head screwdriver

1 - bottom

panel

1 - partition

2 - drawer backs

4 - drawer sides

2 - adjustable

shelves

2 - drawer bottoms

24 - medium

screws

8 - small

screws

2 - medium

bolts

2 - small

bolts

WALL MOUNTING HARDWARE

1 - wall strap 1 - small

screw

1 - plastic

anchor

1 - large

screw

Missing hardware? Please call 800.606.6387 for replacements.

2 - magnets

4 - magnet

screws

Summary of content (5 pages)

PAGE 1
HUXLEY SMALL SIDEBOARD ASSEMBLY HARDWARE 12 - wood 19 - large 24 - medium 8 - small screws screws dowels screws 2 - medium 4 - hinges bolts 10 - large bolts 2 - small bolts 8 - shelf 2 - magnets 4 - magnet 4 - pulls pins screws WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Huxley Small Sideboard. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
HUXLEY SMALL SIDEBOARD left side panel NOTE: Make sure front edge of bottom panel is positioned as shown B partition bottom panel A left and right side panels NOTE: Do not over tighten the bolts right side panel C bottom panel 1 A) Insert 2 wood dowels into left and right side panels as shown. B) Insert 4 wood dowels into partition as shown. C) Insert 4 wood dowels into bottom panel as shown.
PAGE 3
HUXLEY SMALL SIDEBOARD NOTE: Do not over tighten the screws B drawer side drawer front A drawer bottom drawer back drawer side back panel 5 Attach back panel to assembled unit with 24 medium screws as shown. Secure, but do not over tighten the screws, using a screwdriver. 6 A) Slide drawer bottom into corresponding grooves of drawer front and back as shown. B) Attach drawer sides to assembled unit with 4 large screws per side, using a screwdriver. Repeat steps for remaining drawer assembly.
PAGE 4
HUXLEY SMALL SIDEBOARD A drawer assemblies pull B left and right doors 9 A) Attach 1 pull to each drawer assembly with 1 medium bolt as shown. B) Attach 1 pull to each door with 1 small bolt as shown. 10 Insert drawer assemblies into assembled unit as shown. Push drawers back until you hear a click.
PAGE 5
HUXLEY SMALL SIDEBOARD OPTIONAL SAFETY MOUNTING INSTRUCTIONS NOTE: Insert screws 3/4"-1" from the edge of the strap For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. wall strap A) Determine the final location of unit.