Assembly Instruction

HUXLEY LARGE SIDEBOARD
Made in China - r10 Page 4 of 5
10 Insert top and bottom drawer assemblies into
assembled unit as shown. Push drawers back until you
hear a click.
9 A) Attach 1 pull to each drawer assembly with 1
drawer pull bolt as shown.
B) Attach 1 pull to each door with 1 door pull bolt as
shown.
drawer
assemblies
left and right
door front
pull
bottom drawer
assembly
bottom drawer
assembly
top
drawer
assembly
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
pre-installed
screw
11 Attach 2 door hinges of left and right doors to
corresponding 2 mounting plates of left and right side
panels as shown. Secure hinges with pre-installed
screw using a screwdriver.
Assembly is now complete.
NOTE: If doors are not
aligned, refer to the Hinge
Adjustment diagram at the
end of these instructions
left
door
right
door
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
clear lacquer.
CLEANING AND CARE