Assembly Instruction

HUXLEY LARGE SIDEBOARD
Made in China - r10 Page 3 of 5
6 A) Slide top drawer bottom into corresponding grooves
of top drawer front and back as shown.
B) Attach top drawer sides to assembled unit with 4 large
screws per side as shown, using a screwdriver.
Repeat steps for bottom drawer assemblies.
7 A) Insert 8 shelf pins at desired shelf heights. Press
shelf pins firmly to secure.
B) Place 2 adjustable shelves onto shelf pins as shown.
Make sure shelves are securely supported by each shelf
pin.
C) Attach 4 magnets to top and bottom panels as
shown. Secure each magnet with 2 magnet screws,
using a screwdriver.
5 Attach back panel to assembled unit with 28 medium
screws as shown. Secure, but do not over tighten the
screws, using a screwdriver.
back panel
top drawer
back
top drawer
front
top drawer
side
top drawer
side
adjustable
shelf
top
drawer bottom
8 Attach 2 door hinges to left and right doors with 2 small
screws per hinge as shown, using a screwdriver.
adjustable
shelf
shelf pin
NOTE: Do not over
tighten the screws
B
A
B
A
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
left door
A
B
C
right door