Assembly Instruction

HUXLEY LARGE SIDEBOARD
Made in China - r10 Page 2 of 5
1 A) Insert 2 wood dowels into left and right side panels
as shown.
B) Insert 4 wood dowels into left and right partitions as
shown.
C) Insert 4 wood dowels into bottom panel as shown.
2 With the assitance of another adult, fit dowels of
bottom panel into corresponding holes of left and right
side panels as shown. Secure bottom panel to left and
right side panels with 4 large bolts as shown, using a
phillips head screwdriver. Do not over tighten the bolts.
left side
panel
right side
panel
NOTE: Do not over
tighten the bolts
left and right
side panels
A
left and right
partitions
B
bottom panel
C
bottom
panel
NOTE: Make sure front
edge of bottom panel is
positioned as shown
left partition
right partition
NOTE: Do not over
tighten the screws
top
panel
NOTE: Make sure glides of
partitions are facing inside
as shown
NOTE: Do not over
tighten the bolts
3 Fit dowels of left and right partition into corre-
sponding holes of bottom panel as shown. Secure
left and right partition to bottom panel with 6 large
screws as shown, using a phillips head screwdriver.
Do not over tighten the screws.
4 With the assistance of another adult, position assembled
unit upright as shown. Fit dowels of left/right side panels
and left/right partitions into corresponding holes of top
panel as shown. Secure top panel with 8 large bolts as
shown, using screwdriver.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com