Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Haworth® Eddy™ Adjustable Height Desk

Made in China - r01 Page 1 of 3

Haworth Eddy Adjustable Height Desk

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Thank you for purchasing the Haworth ® Eddy ™

Adjustable Height Desk. This page lists all the contents

included in the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

HARDWARE

8 - countersunk

bolts (pre -

attached to top)

8 - small bolts 4 - large bolts

2 - nylon ring spacer

2 - nylon block spacer

phillips head screwdriver

allen wrench (included)

Missing hardware? Please call 800.606.6387 for replacements.

(We recommend the use of hand tools instead of power tools)

COMPONENTS

1 – top and frame

2 – leg

(1 left, 1 right)

1 – release handle

1 – base

Put the nylon

ring spacer on

to the pin of

base.

NOTE: For the

ease of next

installation steps,

rotate the base

to have the back

end rest on the

oor as picture

shows.

HAWORTH EDDY

ADJUSTABLE HEIGHT DESK

Page 1 of 4

Summary of content (4 pages)

PAGE 1
TM HAWORTH EDDY Haworth Eddy Adjustable Height Desk ADJUSTABLE HEIGHT DESK R HARDWARE 8 - countersunk bolts (pre attached to top) 2 - nylon block spacer 8 - small bolts 4 - large bolts 2 - nylon ring spacer Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Haworth ® Eddy ™ Adjustable Height Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
HAWORTH EDDY Haworth Eddy Adjustable Height Desk ADJUSTABLE HEIGHT DESK TM R 2 Hook the bottom pivot hole of the right leg to the pin of base. 3 Secure the large bolt by allen wrench to attach base with both legs. NOTE: Make sure the leg with bag hook on the right hand as below picture shows.. 4 Place top and frame onto a clean, padded surface. Dismantle the frame from the top by philips head screwdriver, keep the countersunk bolt for later step.
PAGE 3
HAWORTH EDDY Haworth Eddy Adjustable Height Desk ADJUSTABLE HEIGHT DESK R 6 Place frame on to the top adaptor of legs and attached them together with small bolt. 8 Press release both handles to adjust the table height if needed. TM NOTE: Secure one small bolt on each leg first to get frame and adaptor at the right matching on the screw holes. Then secure others. 7 Apply top on to the frame and attach by countersunk bolts. CLEANING & CARE Clean surfaces with a dry or damp soft cloth.
PAGE 4
HAWORTH EDDY Haworth Eddy Adjustable Height Desk ADJUSTABLE HEIGHT DESK R TM USER INSTRUCTION ADJUSTABLE HEIGHT - Gas cylinder for easy height adjustable from 650 mm up to 1020 mm BAG HOLDER - to keep your valuables close to hand LOW BASE - to fit under virtually any chair Mobility - so Haworth ® Eddy TM can be rolled away SUSTAINABLE - Highly recyclable and manufactured to ISO 14001 HEIGHT ADJUSTMENT 1020 mm 650 mm CAUTIONS! Max load of 35kgs on Haworth ® Eddy TM Made in China - r01 Max load of 5kg